Setting
RGBCMY
Reset to Defaults
Note: The Brightness setting does not affect laser brightness. To change the laser brightness mode,
use the Light Output setting.
Input Source Settings
To change settings for an input source, make sure the source is connected and select that source.
Setting
Source
Aspect
Reset to Defaults
Note: Select Reset Image Settings to reset all settings on the Image menu to their default values.
Parent topic:
Adjusting the Menu Settings
Related references
Input Signal Settings - Signal I/O Menu
Available Image Aspect Ratios
Available Color Modes
Options
Varying levels available
—
Options
—
See the list of available aspect
ratios
—
95
Description
Adjusts the hue, saturation, and
brightness for each color
Resets all settings for the Color
Mode currently selected
Description
Displays the current input source
selected
Sets the aspect ratio (width-to-
height ratio)
Resets all settings for the currently
selected input source