Table of Contents
Advertisement
2. Press the Light Output button on the remote control.
Note: You can also access this setting from the projector's Image menu.
3. Use the left and right arrow buttons to adjust the brightness.
Note: Press the Default button on the remote control to return to the default setting.
4. Press Menu or Esc to exit the menus.
Parent topic:
Turning On Dynamic Contrast
You can turn on the Dynamic Contrast setting to automatically optimize the image luminance. This
improves the image contrast based on the brightness of the content you project.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
Using Basic Projector Features
57
Advertisement
Table of Contents
