Epson LS11000 User Manual page 129

Power light Status light
Flashing blue Varies
Off Flashing blue
Off Flashing blue
Flashing blue Varies
Off Flashing blue
Laser light Temp light
Varies Flashing
orange
Off Orange
Off Flashing
orange
Flashing Varies
orange
Orange Off
129
Status and solution
Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
• If operating the projector at high
altitude, turn on High Altitude
Mode
Projector has overheated and turned
off; leave it turned off to cool down for
about five minutes. After the fan has
stopped, do the following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
A fan or sensor has a problem; turn
the projector off, unplug it, and
contact Epson for help
Laser warning; turn the projector off,
unplug it, and contact Epson for help
Laser problem; turn the projector off,
unplug it, and contact Epson for help