Epson LS11000 User Manual page 97

Setting
Signal Format
Overscan
Color Space
Dynamic Range
Options
Video Range
Auto
Off
4%
8%
Auto
BT.709
BT.2020
Dynamic Range
Signal Status
HDR10/HDR10+ Setting
HLG Setting
97
Description
Sets the video range to match the setting of
an input source connected to the HDMI
ports
Auto: detects the video range automatically
Limited (16–235): for brightness range
16–235
Full (0–255): for brightness range 0–255
Changes the projected image ratio to make
the edges visible by a selectable
percentage or automatically when
projecting a component signal
Sets the conversion system for the color
space (set to Auto for most cases)
Dynamic Range: changes the range of
dark and bright areas in the image (set to
Auto for most cases)
Signal Status: displays the detected input
signal
HDR10/HDR10+ Setting: adjusts the PQ
curve of the dynamic range (available when
Dynamic Range or Signal Status is set to
HDR10 or HDR10+)
HLG Setting: adjusts the HLG curve of the
dynamic range (available when Dynamic
Range or Signal Status is set to HLG)