Setting
Standby Mode
Indicators
Trigger Out
Inv Direction Button
Reset Operation Settings
Parent topic:
Adjusting the Menu Settings
Related references
Image Quality Settings - Image Menu
Options
Communication On
Communication Off
On
Off
On
Off
On
Off
—
105
Description
Enable this setting to allow
monitoring and control of the
projector over a network when
the projector is in standby mode
Enables or disables the status
indicator lights on the projector
Outputs a DC 12V signal at 200
mA maximum from the Trigger
Out port whenever the projector
is turned on
Inverts the direction of the arrow
buttons on the control panel to
match the projector's installation
position
Reset all settings on the
Operation menu to their default
values