Setting
PJLink Password
Notified IP Address
AMX Device Discovery
Control4 SDDP
Parent topic:
Selecting Wired Network Settings
Options
Up 32 alphanumeric characters Enter a password for using the
Various IP addresses
On
Off
On
Off
38
Description
PJLink protocol for projector
control
(do not use spaces or any
symbols besides @)
Enter the IP address to receive
the projector's operating status
when the PJLink notification
function is enabled. Enter the
addresses using 0 to 255 for
each address field.
Do not use these addresses:
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a
number from 0 to 255).
Set to On to allow AMX Device
Discovery to detect the projector
Set to On to allow device
information to be acquired using
Control4 Simple Device
Discovery Protocol (SDDP)