Program List; Cycle Counter - Panasonic NE-2157R Operating Instructions Manual


For selecting length of tone "short beeps for 60 seconds":
Example: To select short beeps for 60 seconds
PAD
Follow step 1-4 on page 12. DO NOT CLOSE THE DOOR!
5 Within three seconds after pressing Prog pad at step 4, press
0
Number/Memory pad "0" once.
"PROG" will start to blink and 2nd Stage Heating Indicator "2" (the
length of beep tone "short beeps for 60 seconds") will be indicated.
6 Press Prog pad.
PROG
"PROG" will stop blinking. This means that you have completed
programming.
Three seconds later, "0" will appear.
• Close the door. Digital Display Window will go blank.
G. PROGRAM LIST
PAD
1 Open the door and leave it open.
The oven lamp will turn on and "0" will appear.
2 While pressing Stop/Reset pad, press Start pad.
STOP/
START
All currently programmed information (the program set into each
RESET
Number/Memory pad (A/B sides), Beep Tone, and Program Lock
information) will continuously appear.
H. CYCLE COUNTER
X To Check The Number Of Cycles That The Oven Has Been Used In
Manual Mode:
PAD
1 Open the door and leave it open.
The oven lamp will turn on and "0" will appear.
2 While pressing Stop/Reset pad, press Power Level Selector pad.
POWER/
STOP/
The number of cycles that the oven has been used in manual mode will
LEVEL
RESET
appear.
How to Operate
INSTRUCTION
INSTRUCTION
INSTRUCTION
- 13 -
DIGITAL DISPLAY WINDOW
PROG
1
PROG
2
PROG
2
DIGITAL DISPLAY WINDOW
e.g.
PROG
1
HI
PROG
1
MED
PROG
2
MED
PROG
DIGITAL DISPLAY WINDOW
e.g.