Table of Contents
Advertisement
I. To Read the Cycle Counter
To display total cooking hours ever used
To display the total number of times ever using oven
J. To Activate Program Lock
K. To Deactivate Program Lock
How to Operate
1. Open the door and leave it open.
The oven lamp will turn on. "0" will appear in the display.
2. While touching Start Pad, touch Number Pad "3".
Total cooking hours ever used will appear.
1. Open the door and leave it open.
The oven lamp will turn on. "0" will appear in the display.
2. While touching Start Pad, touch Power Level Selector Pad.
The total number of times ever using oven will appear.
Note: The maximum number of times on the counter will be 3,999,999. The last two
digits are dropped and displayed in units of 100 when used over 100 times.
1. Open the door and leave it open.
The oven lamp will turn on. "0" will appear in the display. While touching Start
Pad, touch Prog Pad until the display show "PROG", "P" and "L" (for more than
2 seconds).
2. Program Lock feature is now activated.
Note: In "Program Lock"
a. The oven is started by touching the desired Memory Pad. There is no need to
touch Start Pad.
b. The Interrupt feature is deactivated—opening the door cancels the remaining
time on the program.
c. The oven can not be programmed or run manually until the Program Lock feature
is deactivated.
1. Open the door and leave it open.
The oven lamp will turn on. "0" will appear in the display. While touching Start
Pad, touch Prog Pad until the Digital Display Window show "PROG" and "P" (for
more than 2 seconds).
2. Program Lock feature is now deactivated.
Note: In "Program Unlock"
a. Oven reverts to a two-touch operating mode (Number/Memory Pad + Start Pad).
b. Repeat and interrupt features are operational.
c. Memory Pads can be programmed.
d. Manual heating is operational.
e. Tone loudness control, length control and pitch control (beep tone at the end of
heating cycle/filter cleaning alarm) are operational.
– 24 –
Hide quick links:
Advertisement
Table of Contents
