Sony HDR-PJ800 Service Manual page 37

CAUTION FOR HANDLING THE LENS BLOCK
ASSY (LSG-0010B)
Do not hold the following part.
Lens
Very weak
Must not put the lens block assy
(LSG-0010B) turning lens downward.
NG
Downward
OK
Cabinet (F) Block
HDR-PJ800/PJ810/PJ810E/PJ820/PJ820E_L2
Assembly-1: Notes on Assembling the Lens Barrier Unit.
Route the barrier harness.
Lens Barrier
Unit
Barrier harness
Ribs
Rib
Barrier harness
Assembly-2: Notes on Disassembling the Lens Ornament.
3
Lock
2
1
Lens Ornament
3. ASSEMBLY
Assembly-3: How to distinguish the side of Optical Filter Block
facing to Lens Device.
This IR coated optical filter block has side A and side B.
When the optical filter block is exposed to fluorescent light at
a place where environmental light is blocked, side A glow red
and side B glow white at certain angles.
Install the optical filter block with side B facing toward the lens.
Optical Optical
Filter Filter
Block Block
Hold it with tweezers
or the like.
[IR Cut Coated Side A] [IR Cut Coated Side B]
Glow red at certain angles. Glow white at certain angles.
3-1
Assembly-4: The Method of attachment of FP-2180 Flexible
Board.
The shape may be different from the illustration
depending on models.
1 Fold dotted line parts of the FP-2180 flexible
board as shown in figure.
Hold it with tweezers
or the like.
Lens Device side
Mountain fold
Valley fold
FP-2180
Flexible Board
Adhesive tape
Adhesive tape
Valley fold
Adhesive tape
Valley fold
Mountain fold
Valley fold