Sony HDR-PJ800 Service Manual page 11

(9) Disconnect the connector and remove the four screws to detach the
Sheet Metal (B), Stopper, Motor B, and LF-2025 Flexible Board.
Connector
Screw
Screw
Screw
Screw
Sheet Metal (B),
Stopper,
Motor B
LF-2025 Flexible Board
(10) Disconnect the connector and remove the three screws to detach
the Motor B.
Peel off the adhesive part of the LF-2025 Flexible Board.
Screw
Screw
Screw
Adhesive part
LF-2025 Flexible
Board
Connector
Sheet Metal (B),
Stopper
Motor B
HDR-PJ800/PJ810/PJ810E/PJ820/PJ820E_L2
(11) Remove the three screws while turning the Plate of the Motor A to
detach the Motor A.
Plate of the Motor A
Screw
Screw
Plate of the Motor A
Screw
Screw
Screw
Screw
Plate of the Motor A
Motor A
(12) Remove the screw, and remove the boss and the claw to detach the
Front Ornament.
Boss
P
T O
Front Ornament
Screw
Claw
(13) Peel off the CM Radiation Sheet.
P
T O
CM Radiation Sheet
(14) Peel off the adhesive part of the LF-2026 Flexible Board.
LF-2026 Flexible Board
Adhesive part
P
T O
1-7
– ENGLISH –
(15) Remove the two screws and disconnect the connector to detach the
Sheet Metal (D-Sub), the LF-2026 Flexible Board.
Screw
Screw
Sheet Metal (D-Sub),
LF-2026 Flexible Board
Connector
(16) Peel off the adhesive part of the LF-2026 Flexible Board.
LF-2026 Flexible Board
Adhesive part
Sheet Metal (D-Sub)