Specifications - Furuno DSC-60 Operator's Manual

SPECIFICATIONS OF DSC/WATCH RECEIVER
1. DSC TERMINAL
(1) Line Out:
(2) Line In:
(3) Frequency Shift:
(4) Baud Rate:
(5) Protocol:
2. GMDSS DSC WATCH KEEPING RECEIVER
(1) Receiving Frequency
For MF spec:
For MF/HF spec:
(2) Class of Emission:
(3) Frequency Stability:
(4) Intermediate Frequency: 1st: 54455 kHz, 2nd: 455 kHz
(5) Selectivity:
(6) RF Input Impedance:
(7) Receiving Sensitivity:
(8) Warming-up Time:
3. GENERAL WATCH KEEPING RECEIVER (option)
(1) Receiving Frequency
(2) Class of Emission:
(3) Frequency Stability:
(4) Intermediate Frequency: 1st: 54455 kHz, 2nd: 455 kHz
(5) Selectivity:
(6) RF Input Impedance:
(7) Receiving Sensitivity:
(8) Warming-up Time:
DSC-60
0 dBm (adjustable between –10 dBm and +10 dBm),
600 ohms, balanced
-10 to +10 dBm, 600 ohms, balanced
Mark; 1615 Hz, Space; 1785 Hz
100 baud's ±30 x 10
Complies with ITU-R Rec.493‐9, 541‐8, 1082-1
2187.5 kHz
2187.5 kHz, 4207.5 kHz, 6312 kHz, 8414.5 kHz,
12577 kHz and 16804.5 kHz
F1B, J2B
Within ±10 Hz
-6 dB : 270 Hz or more
-30 dB: within ±380 Hz
-60 dB: within ±550 Hz
50 ohms
Better than 0 dB (at error rate within 1%)
1 minute (oven 30 minutes)
1.6 MHz to 27.5 MHz
F1B, J2B
Within ±10Hz
-6 dB : 270 to 300Hz
-30 dB: within ±380Hz
-60 dB: within ±550Hz
50 ohms
Better than 0 dB (at error rate within 1%)
1 minute (oven 30 minutes)
SP - 1
-6