Preparing Send Messages; Preparing Individual Call Messages - Furuno DSC-60 Operator's Manual

6. PREPARING SEND MESSAGES

In Chapter 4 you learned how to prepare and send individual, group, geographical area and
PSTN calls. In this chapter you will learn how to prepare and store them (including test calls) for
future transmission. 150 such files can be stored.
6.1

Preparing Individual Call Messages

1. Press the [#/SETUP] key to open the Setup menu.
2. Select MESSAGE and press the [ENT] key.
3. Press the [ENT] key to open the CALL TYPE menu.
Message file entry
*
INDIVIDUAL
CALL TYPE : INDIVIDUAL
PSTN CALL
STATION ID : ---------
GROUP CALL
COM. TYPE : TELEPHONE
AREA CALL
COM. FREQ : NO INFO
TEST CALL
DSC FREQ : 2M-INTL
4. Use or to select INDIVIDUAL and press the [ENT] key.
5. Press the [ENT] key to open the STATION ID entry window.
Message file entry
*
CALL TYPE : INDIVIDUAL
STATION ID : ---------
COM. TYPE : TELEPHONE
COM. FREQ : NO INFO
DSC FREQ : 2M-INTL
6. Key in ID of coast station or ship station which is to receive the call and press the [ENT] key.
How to input station ID automatically
If you have previously registered some station IDs,
- - - - - - - - -
you can insert them into your message as follows:
1. Press the [FILE] key after completing step 4 in the
2. Select COAST STATION or SHIP STATION and
3. Select file which contains ID you want to use
4. Press the [ENT] key to insert ID number in message.
above procedure. The following display appears.
Select ID file
COAST STATION
SHIP STATION
press the [ENT] key.
"
(press to show ID number).
Note: You can print the
Select ID file list by pressing
the [8/PRINT] key.
6-1