Receiving A Group Call - Furuno DSC-60 Operator's Manual

Send message
***
CALL TYPE
GROUP ID
PRIORITY
COM. TYPE
COM. FREQ
DSC FREQ
GO TO ALL VIEW
13. Press the [CALL] key to send the group call (transmission time: about 7 sec.). The display
shows "Group call in progress" while the call is being sent.
Group
call in progress!
GROUP ID :
ROUTINE
TELEPHONE
DSC FREQ :
TIME TO GO
14. The DSC standby screen automatically appears after the message is sent.
4.3.2

Receiving a group call

Group ID must be registered in order to receive a group call. See note on page 6-4.
1. The audio alarm sounds and the display shows "Group call received" when a group call is
received.
Group
call received.
FROM SHIP:
ROUTINE
TELEPHONE
2. Press the [CANCEL] key to silence the alarm, and the display changes as below.
Received message
*
JUL-23-1999-23:59
GROUP CALL
FROM SHIP :
ROUTINE
TELEPHONE
GO TO ALL VIEW
3. Press the [CANCEL] key to return to the DSC standby screen. Watch on the working
frequency.
***
: GROUP
:
012345678
: ROUTINE
: TELEPHONE
: 2164.0 KHZ
: 2177.0 KHZ
012345678
2164.0 KHZ
2177.0 KHZ
: 6S
123456789
2164.0 KHZ
STOP ALARM
*
ECC: OK
123456789
2164.0 KHZ
4-19