Preparing Group Call Messages - Furuno DSC-60 Operator's Manual

6.2

Preparing Group Call Messages

1. Press the [#/SETUP] key to open the Setup menu.
2. Select MESSAGE and press the [ENT] key.
3. Press the [ENT] key to open the CALL TYPE menu.
Message file entry
*
INDIVIDUAL
CALL TYPE : INDIVIDUAL
PSTN CALL
STATION ID : ---------
GROUP CALL
COM. TYPE : TELEPHONE
AREA CALL
COM. FREQ : NO INFO
TEST CALL
DSC FREQ : 2M-INTL
4. Use or to select GROUP CALL and press the [ENT] key.
5. Press the [ENT] key to open the GROUP ID entry window.
Message file entry
*
CALL TYPE: GROUP CALL
GROUP ID : 0 --------
COM. TYPE : TELEPHONE
COM. FREQ : NO INFO
DSC FREQ : 2M-INTL
6. Key in ID of group which is to receive the call and press the [ENT] key.
7. Press the [ENT] key to open the COM. TYPE menu.
Message file entry
*
CALL TYPE: GROUP CALL
GROUP ID : 012345678
COM. TYPE : TELEPHONE
COM. FREQ : NO INFO
DSC FREQ : 2M-INTL
8. Select appropriate communications type and press the [ENT] key.
9. Press the [ENT] key to open the COM. FREQ menu.
6-4
How to input group ID automatically
If you have previously registered some group IDs,
you can insert them into your message as follows:
000000000
1. Press the [FILE] key after completing step 4 in the
above procedure. The following display appears.
# UP $ DOWN
2. Select file which contains ID you want to use
(press
3. Press the [ENT] key to insert ID number in message.
TELEPHONE
NBDP-FEC
Group ID file
"
004. FURUNO
"
500. MARINE
"
777. ELECTRIC
"
to show ID number).
Note: You can print the
Group ID file list by pressing
the [8/PRINT] key.