Preparing Test Call Messages - Furuno DSC-60 Operator's Manual

Message file entry
*
CALL TYPE: PSTN CALL
COAST ID 001234567
TEL NO. : 1234567890---
DSC FREQ : 2M-INTL
10. Select appropriate DSC band and press the [ENT] key. Select DSC frequency and press the
[ENT] key.
11. Follow "How to Enter File Name and Number" on page 6-3 to enter file name and number.
6.5

Preparing Test Call Messages

3. Press the [#/SETUP] key to open the Setup menu.
4. Select MESSAGE and press the [ENT] key.
5. Press the [ENT] key to open the CALL TYPE menu.
Message file entry
*
INDIVIDUAL
CALL TYPE : INDIVIDUAL
PSTN CALL
STATION ID : ---------
GROUP CALL
COM. TYPE : TELEPHONE
AREA CALL
COM. FREQ : NO INFO
TEST CALL
DSC FREQ : 2M-INTL
4. Select TEST CALL and press the [ENT] key.
5. Press the [ENT] key to open the COAST ID menu.
Message file entry
*
CALL TYPE : TEST
000000000
COAST ID
: SAFETY
PRIORITY
DSC FREQ :
GO TO ALL VIEW
6-8
2 MHZ
16 MHZ
4 MHZ
18 MHZ
6 MHZ 22 MHZ
8 MHZ
25 MHZ
12 MHZ OTHER
MANUAL
TL
How to input coast ID automatically
If you have previously registered some coast IDs,
you can insert them into your message as follows:
1. Press the [FILE] key after completing step 4 in the
2187.5 KHZ
2. Select file which contains ID you want to use
3. Press the [ENT] key to insert ID number in message.
Use to scroll
menu.
OTHER: Special, private channels.
MANUAL: For selection of frequency at
radiotelephone when there is "remote control
error."
above procedure. The following display appears.
Test ID file
"
300. FURUNO
"
500. MARINE
"
777. ELECTRIC
# UP $ DOWN
"
(press to show ID number).
Note: You can print the
Test ID file list by pressing
the [8/PRINT] key.