Receiving A Polling Call - Furuno DSC-60 Operator's Manual

4.7.2

Receiving a polling call

Automatic reply
1. The display changes as follows and the audio alarm sounds when a polling request call is
received and the status of the [5/ACK] key is AUTO ACK and the setting of POLLING CALL
on the Auto ack menu is ON.
Polling auto ack
call in progress!
TO SHIP :
ROUTINE
DSC FREQ :
TIME TO GO :
2. After the call is transmitted the following display appears and the audio alarm sounds.
Polling auto ack
call transmitted.
TO SHIP :
ROUTINE
3. Press the [CANCEL] key to silence the alarm. The display changes as below.
Xmitted message
**
JUL-23-1999-23:00:09
POLLING ACKNOWLEDGE
TO SHIP :
123456789
ROUTINE
GO TO ALL VIEW
4. Press the [CANCEL] key to return to the DSC standby screen.
123456789
2177.0 KHZ
7S
123456789
STOP ALARM
**
4-31