How To Send The Berthing Lines Data To Ds-600 - Furuno GS-100 Operator's Manual

6. BERTHING DISPLAY
6.7.4

How to send the berthing lines data to DS-600

To display the berthing lines on the display of the DS-600, do the following.
Note: Turn on the DS-600 before doing the following procedures.
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [5 Berthing Line].
3. Select [2 Share].
4. Press the MENU ESC key to close the main menu.
6-14