Mercedes-Benz E-Class 2011 Owner's Manual page 51

Hide thumbs Also See for E-Class 2011:
Table of Contents

Advertisement

Occupant safety
48
vehicle occupants on the side of the vehicle
on which the impact occurs.
The windowbags are integrated into the side
of the roof frame and deploy in the area from
the A-pillar to the C-pillar.
Saloon (example)
Windowbags : are deployed:
on the side on which an impact occurs
R
at the start of an accident with a high rate
R
of lateral vehicle deceleration or accelera-
tion, e.g. in a side impact
regardless of whether the front-passenger
R
seat is occupied
independently of seat belt use
R
if the vehicle overturns, and the system
R
determines that it can provide the vehicle
occupants additional protection to that
provided by the seat belt
independently of the front airbags
R
®
PRE-SAFE
(preventative occupant
protection)
®
PRE-SAFE
takes pre-emptive measures to
protect occupants in certain hazardous sit-
uations.
®
PRE-SAFE
intervenes:
when BAS PLUS intervenes powerfully on
R
vehicles with DISTRONIC PLUS.
if, on vehicles with DISTRONIC PLUS, the
R
radar sensor system detects an imminent
danger of collision in certain situations.
in critical driving situations, e.g. when phys-
R
ical limits are exceeded and the vehicle
understeers or oversteers severely.
®
PRE-SAFE
takes the following measures
depending on the hazardous situation detec-
ted:
the front seat belts are pre-tensioned.
R
vehicles with the memory function: the
R
front-passenger seat is adjusted if it is in an
unfavourable position.
vehicles with a multicontour seat or active
R
multicontour seat: the air pressure in the
side bolsters of the seat cushion and back-
rest is increased.
if the vehicle skids, the sliding sunroof/
R
panorama sliding sunroof and the side win-
dows are closed so that only a small gap
remains.
If the hazardous situation passes without
resulting in an accident, PRE-SAFE
the belt pretensioning. The air pressure in the
side bolsters on the multicontour seat/active
multicontour seat is reduced again. All set-
tings made by PRE-SAFE
reversed.
If the seat belts are not released:
Move the backrest or seat back slightly, but
X
only when the vehicle is stationary.
The belt pretensioning is reduced and the
locking mechanism is released.
G
WARNING
When adjusting the seat, make sure that
nobody can become trapped.
! Make sure that there are no objects in the
footwell or behind the seats when moving
the seat back. There is a risk that the seats
and/or the objects could be damaged.
®
slackens
®
can then be

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents