Seats
112
Fitting and removing the seat cushion
You must remove the seat cushion if you wish
to lift the luggage compartment floor, e.g. if
the vehicle has a flat tyre.
To remove: fold seat cushion ; upwards
X
and remove it from seat cushion
guides :.
To fit: push seat cushion ; into seat cush-
X
ion guides : at a slight angle from the rear
=.
Fold seat cushion ; back into its original
X
position ? until it engages.
Folding back the folding bench seat
Pull the seat cushion upwards by tab :
X
and fold it back into its original position
until it engages.
Press release button : and fold the head
X
restraints down.
! In order to avoid causing damage, push
the head restraints completely into their
guides and click the seat belt buckles into
their guides.