Setting the specified minimum distance
You can set the specified minimum distance
for DISTRONIC PLUS by varying the time span
between one and two seconds. With this func-
tion, you can set the minimum distance that
DISTRONIC PLUS keeps to the vehicle in
front, dependent on vehicle speed. You can
see this distance in the multifunction display
(
page 191).
Y
To increase: turn control ; in direction
X
=.
DISTRONIC PLUS then maintains a greater
distance between your vehicle and the
vehicle in front.
To decrease: turn control ; in direc-
X
tion :.
DISTRONIC PLUS then maintains a shorter
distance between your vehicle and the
vehicle in front.
i
Make sure that you maintain a sufficient
and safe distance from the vehicle in front.
Adjust the distance to the vehicle in front if
necessary.
Displaying DISTRONIC PLUS in the
speedometer
Example: vehicles featuring automatic transmis-
sion with a DIRECT SELECT lever
When DISTRONIC PLUS is activated, one or
two segments ; in the set speed range light
up.
i
For design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set for DISTRONIC PLUS.
If DISTRONIC PLUS detects a vehicle in front,
segments ; between speed of the vehicle in
front : and stored speed = light up.
Displaying DISTRONIC PLUS in the mul-
tifunction display
General notes
In the Assistance menu (
on-board computer, you can select the dis-
tance display.
Select the
Distance display
X
using the on-board computer
(
page 241).
Y
Display when DISTRONIC PLUS is deacti-
vated
When DISTRONIC PLUS is deactivated, you
will see the following in the multifunction dis-
play:
Driving systems
page 240) of the
Y
function
191
Z