Mercedes-Benz E-Class 2011 Owner's Manual page 248

Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Intell. Light Sys.
If the Intell. Light System
been switched on, the cone of light and the
L symbol in the multifunction display
are shown in red.
Press the a button to save the setting.
X
If you set the dipped-beam headlamps for
driving on the right/left (
multifunction display shows the
inoperative display message under the
image of the vehicle for the
System function in the
Setting the dipped-beam headlamps for
driving on the left/right
This function is only available on vehicles with
the Intelligent Light System.
You can use this function to switch between
symmetrical beam and asymmetrical dipped
beam ( page 122).
Y
If you set the dipped-beam headlamps for
driving on the right/left, then motorway
mode and the extended range foglamps are
not available.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light submenu.
Press the a button to confirm.
X
Press : or 9 to select the
X
beams Setting for
You will see the selected setting:
side traffic or Left-side
Press the a button to save the setting.
X
When you change the setting, conversion
does not take place until the next time the
vehicle is stationary.
Settings menu.
function.
function has
page 245), the
Y
System
Intell. Light
Light submenu.
Settings menu.
Dipped
function.
Right-
traffic.
Menus and submenus
You can also have the dipped-beam head-
lamps set for driving on the right or left at a
qualified specialist workshop.
Switching Adaptive Highbeam Assist on/
off
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Adapt. main beam
If the Adapt. main beam
been activated, the cone of light and the
_ symbol in the multifunction display
are shown in red.
Press the a button to save the setting.
X
Setting the brightness of the ambient
lighting
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light submenu.
Press the a button to confirm.
X
Press the : or 9 button to select
X
Amb. light +/-.
Press the a button to confirm.
X
Press the : or 9 button to adjust the
X
brightness to any level from
5 (bright).
Press the a or % button to save the
X
setting.
Activating/deactivating the surround
lighting and exterior lighting delayed
switch-off
If you have activated the
ing function and the light switch is set to
Ã, the following functions are activated
when it is dark:
Surround lighting: the exterior lighting
R
remains lit for 40 secondsafter unlocking
Settings menu.
function.
function has
Settings menu.
Off to Level
Surround light‐
Z
245