Mercedes-Benz E-Class 2011 Owner's Manual page 307

Hide thumbs Also See for E-Class 2011:
Table of Contents

Advertisement

Stowage areas
304
Otherwise, vehicle occupants could be
injured by objects being thrown around if you:
brake sharply
R
change direction suddenly
R
are involved in an accident
R
Please observe the loading guidelines.
Luggage holder
The luggage holder can be used to secure
light loads against the side wall of the luggage
compartment to prevent them from moving
around.
! Only use the luggage holder to secure
loads with a maximum weight of 7 kg and
with dimensions that allow the loads to be
safely and securely retained by the luggage
holder.
To install: insert two brackets A into the
X
left or right loading rail (
Press release button : of the luggage
X
holder and pull the strap out slightly.
Insert luggage holder ; into brackets A
X
and, while doing so, press release button
= and push the luggage holder downwards
until it engages.
Press release button : of the luggage
X
holder and pull the strap out in the direction
of the arrow.
Place the load between the strap and the
X
luggage compartment side wall.
Using one hand, press locking button : of
X
the luggage holder.
page 303).
Y
With your other hand, let the strap go slowly
X
until the load is secured.
Make sure that locking button ? on brack-
X
ets A is pressed.
This keeps brackets A in place on the
loading rail.
To remove: press release button = on
X
respective bracket A and remove luggage
holder ; by pulling upwards and out.
Telescopic rod
The telescopic rod can be used to secure the
load against the rear seats to prevent it from
moving around.
To install: insert one bracket ; into both
X
the left and the right loading rails and slide
it to the desired position (
Insert telescopic rod : into brackets ;
X
and, while doing so, press release but-
ton ? and push the rod downwards until it
engages.
Make sure that locking button = on brack-
X
ets ; is pressed.
This keeps brackets ; in place on the
loading rail.
To remove: press release button ? on
X
respective bracket ; and remove tele-
scopic rod : by pulling it upwards and out.
page 303).
Y

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents