Changing A Wheel - Mercedes-Benz E-Class 2011 Owner's Manual

Hide thumbs Also See for E-Class 2011:
Table of Contents

Advertisement

Changing a wheel

370
Also observe the notes in the section on
tyre pressures (
Make sure that the key is in position 2 in
X
the ignition lock.
Press the = or ; button on the steer-
X
ing wheel to select the Serv.menu.
Press the 9 or : button to select
X
Tyre
pressure.
Press the a button.
X
The multifunction display shows the cur-
rent tyre pressure of the individual tyres or
the
Tyre pressures displayed after
a few minutes of driving
Press the : button.
X
The
Use current pressures as new
reference values
the multifunction display.
If you wish to confirm the restart:
Press the a button.
X
The
Tyre press. monitor restarted
message appears in the multifunction dis-
play.
After you have driven for a few minutes, the
system checks whether the current tyre
pressures are within the specified range.
The new tyre pressures are then accepted
as reference values and monitored.
If you wish to cancel the restart:
Press the % button.
X
The tyre pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tyre pres-
sure monitor
In certain countries, a radio type approval for
the tyre pressure monitor may be required.
The radio type approval number for the tyre
pressure monitor can be found online at:
http://www.mercedes-benz.de/
betriebsanleitung.
page 365).
Y
message.
message appears in
Changing a wheel
Flat tyre
The "Breakdown assistance" section
(
page 340) contains information and notes
Y
on how to deal with a flat tyre. It also provides
instructions on changing a wheel or fitting the
spare wheel/emergency spare wheel.
Interchanging the wheels
G
WARNING
Interchanging the front and rear wheels may
severely impair the driving characteristics if
the wheels or tyres have different dimensions.
The wheel brakes or suspension components
may also be damaged. There is a risk of acci-
dent.
Interchange front and rear wheels only if the
wheels and tyres are of the same dimensions.
Interchanging the front and rear wheels of
differing dimensions can render the general
operating permit invalid.
Always pay attention to the instructions and
safety notices in the section on "Wheel
changing and spare wheel fitting"
(
page 344).
Y
The wear patterns on the front and rear tyres
differ, depending on the operating conditions.
Interchange the wheels before a clear wear
pattern has formed on the tyres. Front tyres
typically wear more on the shoulders and the
rear tyres in the centre.
On vehicles that have the same size front and
rear wheels, you can interchange the wheels
every 5,000km to 10,000 km depending on
the degree of tyre wear. Maintain the direc-
tion of tyre rotation.
Clean the contact surfaces of the wheel and
the brake disc thoroughly every time a wheel
is interchanged. Check the tyre pressure and,
if necessary, restart the tyre pressure loss
warning system or the tyre pressure monitor.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents