NEC NVM-2000 Manual page 13

17. Select one of the three available (extra) power supply connectors and connect the power sup-
From power supply
(any one of 3 connectors)
18. Replace the cover of the Voice Mail cabinet and secure in place with screws retained in step 6.
19. Connect the monitor cord and the keyboard cord.
20. Connect the system power cord.
Note: Do not turn on system power.
21. Go to Write the Hardware Settings for the New Drive to CMOS on the next page.
Issue 1-0
All manuals and user guides at all-guides.com
ply to the expansion hard drive. See Figure 14.
Note: You may find that the available (extra) power supply wires with connectors are bundled
and secured with pull-ties. If they are, carefully cut the pull-ties with a pair of diagonal
cutters.
Note: For clarity, floppy ribbon cable and
Figure 14
Installing an Expansion Drive
master hard drive power wires are
not shown.
Install the Drive
DT-expHD-15
9