Canon MR-14EXl Instructions Manual page 60

In the manual flash mode, you can set the flash output from 1/1 (full) to 1/64
power in whole-stop increments. The flash tubes can be fired in one of three
configurations: 1. Fire both flash tubes at the same output, 2. Fire flash tube
A at a different output from flash tube 8,3. Fire only one of the flash tubes.
Set the camera's shooting mode
to Av or M.
Press the MR-14EX's <MODE>
button and select M.
~
Pressing the
<MODE>
button
toggles the flash mode between TTL
and M.
CTTL~M~
Press the
<SEUSET>
button.
~
The flash output display blinks.
Press the
< + >
or
<- >
button to
set the desired flash output.
~
Each time you press the button, the flash
output increases or decreases by one stop.
Press the <
SEUSET
> button again.
~
The flash output is displayed.
Set the camera's aperture.
Focus and take the picture.
• Check that the
t
icon (flash ready) is
displayed in the viewfinder before
taking the picture.
60