Fe Lock, - Canon MR-14EXl Instructions Manual

With Type-A cameras, you can set FE (flash exposure) lock. This is the
flash version of AE lock. With FE lock, you use spot metering to obtain the
correct flash exposure reading for a specific area of the subject.
* The flash mode must be set to ETTL.
Select a shooting mode with the
camera.
Focus the subject.
~
FEL 5.b
30
Aim the viewfinder's spot
metering circle over the area of
the sUbject to be metered. Then
press the < FEL > button on the
camera. FE lock remains in effect
for 16 sec.
~
The MR-14EX fires a preflash to
obtain an exposure reading. The
reading is retained temporarily in
memory.
~
FEL
is displayed on the viewfinder
bottom for 0.5 sec.
• You can obtain a new FE lock
reading by pressing the <
FEL
> button
again.
• To cancel FE lock, wait until 16 sec.
elapse or press the <MODE>, <AF>,
or <
~
> button on the camera.
Focus the subject.