Using Flash with the Camera's Shooting Modes
In this mode, you set both the shutter speed and aperture. The TTL
autoflash system controls the flash exposure based on the aperture you
set. The proper exposure of the background is set with both the aperture
and shutter speed.
M
D
I
I
Set the camera's shooting mode
to M and set the aperture and
shutter speed.
• Set the desired aperture and the
shutter speed anywhere from 30 sec.
to the top sync speed. You·can also
use bulb.
Set theMR-14EX's flash mode to
TTL.
6
Q
5.6
~
•
Focus and take the picture.
• .Check that the
J
icon (flash ready) is
displayed in the viewfinder before
taking the picture.
52'