Canon MR-14EXl Instructions Manual page 24

Using Flash with the Camera's Shooting Modes
In this mode, you set both the shutter speed and aperture. The E-TTl
autoflash system controls the flash exposure based on the aperture you
set. The proper exposure of the background is set with both the aperture
and shutter speed.
M D
)
Set the camera's shooting mode
to M and set the aperture and
shutter speed.
• Set the desired aperture and the
shutter speed anywhere from 30 sec.
to the top sync speed. You can also
use bulb.
Set the MR-14EX's flash mode to
ETTL.
~ bO
s.b •
Focus and take the picture.
• Check that the
t
icon (flash ready) is
displayed in the viewfinder before
taking the picture.
24