Using The Wireless Flash System - Canon MR-14EXl Instructions Manual

Using the Wireless Flash System rJIIIIIJm nu ~I~~­
Using Slave C (w/EOS-10, 1V, 3, 030, ELAN 7nE, or 30/33)
You can fire flash tubes A and B and slave C at the same time. A correct
flash exposure is obtained with flash tubes A and B together, and slave C
alone is set automatically to obtain a correct exposure. Slave C is used to
eli"minate background shadows or to create accent lighting.
Imiml
A : B C
+0
:~D
8:1- 4:1- 2:1-
~
-1:2 -1:4 -1:8
at:
Check that
Imiml
A : B C
is
displayed on the LCD panel_
• If it is not displayed, press the < RAT I0 >
button until it is displayed. (-7p.42)
Check that the master unit's pilot .
lamp is lit and that slave C is also
flash-ready.
Focus and take the picture.
Check that the master unit's flash
exposure confirmation lamp lights.
_ With Type-A cameras, C. Fn-5 can have both the master unit and slave unit
fire together as one group.
(~p.64)
• While Imiml is not displayed on the master unit, you can just position the
slave unit as desired. .
45