NEC PA1004UL-B User Manual page 81

4. Start up the web browser and enter the address or URL in the input field.
Specify the address or URL as "http://<IP Address of Projector>/index.html".
The HTTP server screen will be displayed.
NOTE:
• To use the projector in a network, consult with your network administrator about network settings.
• The display's or button's response can be slowed down or operation may not be accepted depending the settings of your network.
Should this happen, consult your network administrator. The projector may not respond if its buttons are repeatedly pressed in rapid
intervals. Should this happen, wait a moment and repeat. If you still can't get any response, turn off and back on the projector.
• If the PROJECTOR NETWORK SETTINGS screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your web
browser (or clear the cache).
• This projector uses "JavaScript" and "Cookies" and the browser should be set to accept these functions. The setting method will vary
depending on the version of browser. Please refer to the help files and the other information provided in your software.
Preparation before Use
Connect the projector to a commercially available LAN cable before engaging in browser opera-
tions. (→ page 168)
Operation with a browser that uses a proxy server may not be possible depending on the type of
proxy server and the setting method. Although the type of proxy server will be a factor, it is possible
that items that have actually been set will not be displayed depending on the effectiveness of the
cache, and the contents set from the browser may not be reflected in operation. It is recommended
that a proxy server not be used unless it is unavoidable.
57
3. Convenient Features