NEC PA1004UL-B User Manual page 235

Reference drawings
* The drawing showing the dimensional requirements is not an actual stand design drawing.
(Unit: mm)
Exhaust
Exhaust
** The example shows the right side of the body (side where the control unit is located) facing downwards.
To make the left side of the body (side where the label is pasted) face downwards, leave a space of 200
mm or more.
Screw holes for 6 - M4 use
300 or greater**
Horizontal adjuster
[Front View]
262
150
Intake air
[Side View]
211
8. Appendix
150
Intake air