NEC PA1004UL-B User Manual page 232

• Option cover A
Mounting
1. Remove the two corner caps from the pro-
jector.
• Keep the removed corner caps for future
use.
2. Turn over the projector.
CAUTION
• For moving the projector, make sure you have at least two people. Attempting to move
the projector alone could result in back pain or other injuries.
3. Attach the option cover A to the projector.
① Shorten the projector tilt foot to the mini-
mum height.
② Hang the two hooks of the option cover A
on the projector tilt foot.
③ Align the two screw fixing parts of the op-
tion cover A with the place of the corner
caps that were removed at step 1.
At this time, the two hooks in the option
cover will enter the grooves in the projec-
tor.
• If the hooks do not enter easily, check the
positions of the grooves. Do not press the
hooks in by force.
• Be careful not to let the cables get pinched
by the option cover A.
4. Turn the two option cover A screws clock-
wise.
• Tighten the screws securely.
208
8. Appendix