NEC PA1004UL-B User Manual page 189

Connecting HDMI Input
You can connect the HDMI output of your Blu-ray player, hard disk player, or notebook type PC to
the HDMI 1 IN or HDMI 2 IN connector of your projector.
HDMI cable (not supplied)
Use High Speed HDMI® Cable.
HDMI OUT
Input connector
HDMI 1 IN
HDMI 2 IN
TIP:
• For users of audio video equipment with an HDMI connector:
Select "Enhanced" rather than "Normal" if HDMI output is switchable between "Enhanced" and "Normal".
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
• When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector's video level can be
made settings in accordance with the Blu-ray player's video level. In the menu select [ADJUST] → [VIDEO] → [VIDEO LEVEL] and
make necessary settings.
• If the HDMI 1 IN or HDMI 2 IN input's sound is not output, check if [HDMI1] and [HDMI2] are set [HDMI1] and [HDMI2] correctly the
on-screen menu [SETUP] → [SOURCE OPTIONS] → [AUDIO SELECT]. (→ page 150)
HDMI 1 IN
S-VIDEO VIDEO L
VIDEO OUT AUDIO OUT
INPUT button on the projector cabinet
HDMI1
HDMI2
6. Connecting to Other Equipment
HDMI 2 IN
AUDIO OUT
Audio cable (not supplied)
R
165
L R
AUDIO IN
Button on the remote control
HDMI1
HDMI2