NEC PA1004UL-B User Manual page 155

TIP:
• Adjusted values in [REF. LENS MEMORY] will not be returned to default when performing [CURRENT SIGNAL] or [ALL DATA] for
[RESET] from the menu.
• To store adjusted values for each input source, use the Lens Memory function. (→ page 59, 108)
[LENS POSITION]
Set back the lens to the home position.
[LENS CALIBRATION]
The adjustment range of the zoom, focus, and shift of the mounted lens is calibrated.
Be sure to carry out [LENS CALIBRATION] after replacing the lens.
• This function is not available for the lens unit NP44ML.
[COLOR UNIFORMITY(TOOL)]
Retrieves the uniformity adjustment value registered in the projector after adjusting with the
ProAssist software application.
[GAMMA(TOOL)]
Retrieves the Gamma Tone adjustment value registered in the projector after adjusting with the
ProAssist software application.
131
5. Using On-Screen Menu