NEC PA1004UL-B User Manual page 132

[3D SETTINGS]
[FORMAT]
Select the 3D video format (recording / transmission format). Select to match the 3D broadcast
and 3D media. Normally, [AUTO] is selected. Please select the 3D input signal format when the 3D
detection signal of the format cannot be distinguished.
[L/R INVERT]
Invert the display order of the left and right videos.
Select [ON] if you feel uncomfortable with the 3D display when [OFF] is selected.
Using the Lens Memory Function [LENS MEMORY]
This function serves to store the adjusted values for each input signal when using the [LENS SHIFT],
motorized [ZOOM], and motorized [FOCUS] functions of the projector. Adjusted values can be ap-
plied to the signal you selected. This will eliminate the need to adjust lens shift, focus, and zoom
at the time of source selection.
STORE
MOVE
RESET
LOAD BY SIGNAL
FORCED MUTE
• This function is not available for the lens unit NP44ML.
Stores the current adjusted values in memory for each input signal.
Applies the adjusted values to the current signal.
Returns the adjusted values to the last condition.
Moves the lens to the registered lens adjustment position when the signal is switched.
Select whether to mute the picture or not when moving the lens.
108
5. Using On-Screen Menu