NEC PA1004UL-B User Manual page 172

AUTH. PC CONTROL Set PC control function using authentication to on or off.
[ON] will enable the PC control function with authentication using the user
name and password registered at [ACCOUNT].
[OFF] will disable the PC control function with authentication.
Art-Net Art-Net is a communication protocol for transmitting and receiving DMX512
over an Ethernet network.
Configure the settings for controlling the projector using the Art-Net controller.
• The function and DMX value set for each channel can be checked in [INFO.].
• See "Art-Net DMX Parameter List" (→ page 201) for the DMX parameters.
[ACCOUNT]
You can register three types of accounts: [USER1], [USER2], and [USER3].
When [PASSCODE] is set, [REGISTER] is enabled for each user.
[CHANGE USER NAME], [CHANGE PASSWORD], [ENABLE], and [DELETE] can be selected once the
account has been registered at [REGISTER].
NOTE:
• This function is for future expansion. Security can be improved by using
together with an application compatible with the authentication function.
For specifications related to the authentication procedure required by the
application software, please visit our web site.
https://www.nec-display.com/dl/en/pj_manual/lineup.html
Art-Net Turns on or off Art-Net.
[2.X.X.X], Automatically calculates the IP address according to the
[10.X.X.X] Art-Net specifications and overwrites it to the current
wired LAN settings (IP address, subnet mask).
SETTINGS Sets DMX Universe and start channel used by the
projector.
CHANNEL Selects projector functions to be assigned to channels
1 thru 12. To temporarily disable the assigned function,
select [LOCK] to set the parameter to a non-operable
value.
148
5. Using On-Screen Menu
—
—