NEC PA1004UL-B User Manual page 51

Adjusting the vertical position of a projected image (Lens shift)
CAUTION
• Perform the adjustment from behind or from the side of the projector. If adjustments are
performed from the front, your eyes could be exposed to strong light and get injured.
• Keep hands away from the lens mounting portion while performing a lens shift. Failure to do
so could result in fingers being pinched by the moving lens.
1. Press either SHIFT/HOME POSITION button
on the cabinet or SHIFT button on the remote
control.
The [LENS SHIFT] screen will be displayed.
2. Press the ▼▲◀▶ buttons to move the projected image.
To set back the lens to the home position
Press and hold the SHIFT/HOME POSITION button over 2 seconds. The lens mounted on the projec-
tor goes back to the home position. (roughly to the center position)
2. Projecting an Image (Basic Operation)
27