Table of Contents
Advertisement
USB Installation Troubleshooting Guide
This section is provided to assist those users who have followed the instructions in this
instruction book, and who are still experiencing problems with their USB installation.
Symptoms
1:
Network error message appears during installation, see below.
2:
Cable modem does not transfer data (pass traffic, i.e., The "PC LINK" light on
your cable modem is not flashing), go to page 35.
3:
Cable modem stops transferring data, go to page 39.
4:
•
Windows response is sluggish once the USB cable is connected, go to page 39.
•
Windows response is sluggish following a computer reboot, go to page 39.
•
The hourglass stays up for several minutes, go to page 39.
•
A network error message is displayed, go to page 39.
5:
The cable modem was successfully installed. Following the cable modem installation,
you install or update an Internet Service Provider's software (e.g., AOL). Now, the
cable modem is no longer functioning properly. (Windows 98 SE only), go to page
40.
Symptom 1:
Network error message appears during installation
A network error message may appear if there are too many network devices installed on
your computer system. This message may resemble Figure 1 (TS fig. 1) below.
USB Troubleshooting
TS Fig. 1
31
Advertisement
Table of Contents
Troubleshooting
