THOMSON RCA DCM245 Manual page 18

CONNECTING THE CABLE MODEM
11. Follow these instructions only if the driver found was NOT the "RCA USB Cable
Modem."
A. Click "Back" to return to the previous window.
B. Ensure that you have selected the "CD-ROM" option.
C. In addition to the CD-ROM selection, choose "Specify a location" (fig. 18 ).
D. In the location box, type in your CD-ROM drive. For example, if your
CD-ROM is located on the E: drive, type "E:\."
E. Click "Next" to continue.
The search should find the driver for the "RCA USB Cable Modem."
F. Confirm that this is the driver selected, and click "Next" to continue.
12. Windows should now prompt you to install the "RCA USB Cable Modem" driver.
Click "Next" to install the driver.
At this point, your PC needs to copy Windows 98 SE specific files. If these files are
not located on your hard drive, you may need to insert your Windows 98 SE
installation media (i.e., Windows disks or Windows CD-ROM), but first remove the
cable modem CD-ROM.
13. After the Windows specific files are copied, you may be asked for another USB driver
file named "NETRCACM.SYS", located on the cable modem CD-ROM. Remove the
Windows 98 SE CD-ROM (if necessary), and reinsert the cable modem
CD-ROM that accompanied your cable modem.
16
Fig. 18