General Information - BMW 2 COUPE Series Owner's Manual

CONTROLS
Setting the date format
1. "CAR"
2. "Settings"
3. "General settings"
4. "Date and time"
5. "Date format:"
6. Select the desired setting.
Language
Setting the system language
1. "CAR"
2. "Settings"
3. "General settings"
4. "Language"
5. Select the desired setting.
Setting the units of
measurement
Depending on the country version, you can set
the units of measurement for some values, for in‐
stance consumption, distances, and tempera‐
ture.
1. "CAR"
2. "Settings"
3. "General settings"
4. "Units"
5. Select the desired menu item.
6. Select the desired setting.
Trip data settings
Principle
The intervals in which the trip data will be reset
can be configured.
60
General settings
Online Edition for Part no. 01405A38726 - VI/21
Resetting trip data
1. "CAR"
2. "Settings"
3. "General settings"
4. "Reset trip data"
5. Select the desired setting.
Speed warning
Principle
The speed warning can be used to set a speed
limit. A warning will be issued when this speed
limit is exceeded.

General information

The warning is repeated if the vehicle speed ex‐
ceeds the set speed limit again, after it has drop‐
ped below it by 3 mph/5 km/h.
Adjusting
1. "CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Warning at:"
6. Turn the Controller until the desired speed is
displayed.
7. Press the Controller.
Activate/deactivate
1. "CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Speed warning"