BMW 2 COUPE Series Owner's Manual page 110

CONTROLS
Removing
Only remove the head restraint if no one will be
sitting in the seat in question.
1. Fold down the rear seat backrest in question.
Enlarging the cargo area, refer to page 263.
2. Raise the head restraint up against the resist‐
ance.
3. Inserting the integrated key.
Integrated key, refer to page 86.
4. Press and hold the integrated key and the
button at the same time, arrows 1, and pull
out the head restraint completely.
Installing
For mounting, insert the head restraints in the
mounts and slide down until you feel the resist‐
ance.
After the installation, make sure that the head re‐
straint engages correctly.
110
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A38726 - VI/21
Exterior mirrors
General information
The mirror on the front passenger side is more
curved than the driver's side mirror.
The mirror setting is stored for the driver profile
currently in use. When a driver profile is selected,
the stored position is called up automatically.
The current exterior mirror position can be stored
using the memory function.
Safety information
Warning
Objects reflected in the mirror are closer than
they appear. The distance to the road users be‐
hind could be incorrectly estimated, for in‐
stance while changing lanes. There is a risk of
accident. Estimate the distance to the traffic
behind by looking over your shoulder.
Overview
1 Adjusting
2 Selecting a mirror, Automatic Curb Monitor
3 Folding in and out
Adjusting electrically
Press the button.
The selected mirror moves along with the
button movement.