BMW 2 COUPE Series Owner's Manual page 298

MOBILITY
mation on run-flat tires and continued driving
with these tires.
If a tire inflation pressure check is
required
Message
An icon with a Check Control message appears
on the Control Display.
Icon Possible cause
Inflation was not carried out according
to specifications, for instance when the
tire has not been sufficiently inflated or
in the case of a natural steady tire pres‐
sure loss.
Measure
Check the tire pressure and correct as needed.
If the tire inflation pressure is too
low
Message
A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon with a Check Control mes‐
sage appears on the Control Display.
Icon Possible cause
There is a tire pressure loss.
Measure
1. Reduce the vehicle speed. Do not exceed a
speed of 80 mph/130 km/h.
2. At the next opportunity, for instance at a filling
station, check the tire inflation pressure in all
four tires and correct if necessary.
298
Wheels and tires
Online Edition for Part no. 01405A38726 - VI/21
If there is a significant tire pressure
loss
Message
A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon with the affected tire appears
in a Check Control message on the Control Dis‐
play.
Icon Possible cause
There is a flat tire or a major tire pres‐
sure loss.
Measure
1. Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneu‐
vers.
2. Check whether the vehicle is fitted with nor‐
mal tires or run-flat tires.
Run-flat tires are labeled with a circular icon
containing the letters RSC marked on the tire
sidewall.
Run-flat tires, refer to page 289.
3. Read the description on What to do in case of
a flat tire.
Actions in the event of a flat tire, refer to
page 300.
Messages: for tires with special
approval
General information
A low tire inflation pressure may cause the DSC
Dynamic Stability Control to be switched on.