BMW 2 COUPE Series Owner's Manual page 246

CONTROLS
Observe the information about the intended use
of the vehicle.
Additional information:
For Your Own Safety, refer to page 8.
Adjusting the departure time via
iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Preconditioning/ventilation"
5. "Departure plan"
6. Select the desired departure time.
7. Set the departure time.
8. Select day of the week, if needed.
Activating the departure time via
iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Preconditioning/ventilation"
5. "Departure plan"
6. Activate the desired departure time.
Display
In the instrument cluster:
The engine runs for the purpose
of operating the pre-conditioning.
The vehicle is not ready to drive.
The icon on the automatic climate con‐
trol signals an activated departure time.
The icon flashes while Remote Engine Start
is running.
Confirmation signals from the
vehicle
The activation of the system is confirmed by
flashing twice.
246
Climate control
Online Edition for Part no. 01405A38726 - VI/21
The parking lights are switched on as long as the
system is switched on.