BMW 2 COUPE Series Owner's Manual page 239

Manual air distribution
Principle
The air distribution for climate control can be ad‐
justed manually.
Adjusting the air distribution
manually
Press the button repeatedly. Select the
desired setting:
▷ Windows, upper body region, and floor area.
▷ Upper body region and floor area.
▷ Floor area.
▷ Windows and floor area.
▷ Windows.
▷ Windows and upper body region.
▷ Upper body region.
The selected air distribution is shown on the cli‐
mate control display.
SYNC program
Principle
The Sync program can be used to apply the set‐
tings on the driver's side to the passenger's side.
Switching the SYNC program on/off
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Synchronize"
The following settings of the driver's side can be
transferred to the front-passenger side:
▷ Temperature.
▷ Air flow.
▷ Air distribution.
▷ AUTO program.
Online Edition for Part no. 01405A38726 - VI/21
Climate control
The program is switched off automatically if the
settings on the front passenger side are
changed.
Defrost function
Principle
Ice and condensation are quickly removed from
the windshield and the front side windows.
Switching the Defrost function
on/off
Press the button.
The LED of the button is illuminated
when the system is switched on.
The air flow can be adjusted manually with the
system switched on.
If there is window condensation, switch on the
AUTO program or the air conditioning to utilize
the condensation sensor. Make sure that air can
flow to the windshield.
Rear window defroster
Principle
Ice and condensation are removed from the rear
window quickly.
Functional requirement
The function is operational when the drive-ready
state is switched on.
Switching rear window defroster
on/off
Press the button. The LED is illumi‐
nated with rear window defroster
switched on.
The rear window defroster switches off automat‐
ically after a certain period of time.
CONTROLS
239