BMW 2 COUPE Series Owner's Manual page 119

Child restraint systems
with tether strap
Safety information
Warning
If the upper retaining strap is incorrectly used
for the child restraint system, the protective ef‐
fect is reduced. There is a risk of injury. Make
sure that the upper retaining strap does not run
over sharp edges and is not twisted as it
passes the upper anchor.
Warning
If the rear backrest is not locked, the protective
effect of the child restraint system is limited or
there is none. In certain situations, for instance
braking maneuvers or in case of an accident,
the rear backrest can fold forward. There is a
risk of injury or danger to life. Make sure that
the rear backrests are locked.
Warning
The attachment points for child restraint sys‐
tems in the vehicle are intended for attaching
child restraint systems only. When other ob‐
jects are mounted, the attachment points can
be damaged. There is a risk of injury or risk of
damage to property. Attach only child restraint
systems at the corresponding attachment
points.
Transporting children safely
Online Edition for Part no. 01405A38726 - VI/21
Attachment points
Icon Meaning
The respective icon shows the
attachment point for the upper
retaining strap. Seats with an
upper top tether are marked
with this icon. It is located on the
rear seat backrest, the rear shelf
or the rear seat.
Routing the retaining strap
1 Driving direction
2 Head restraint
3 Hook for upper retaining strap
4 Attachment point
5 Rear shelf
6 Seat backrest
7 Upper retaining strap
Attaching the upper retaining
strap to the attachment point
1. Open the attachment point cover.
2. If necessary, raise the head restraint.
3. Guide the upper retaining strap between the
supports of the head restraint.
4. Hook the hook of the retaining strap to the at‐
tachment point.
5. Tighten the retaining strap by pulling it down.
6. Lower and engage head restraint as needed.
CONTROLS
119