Section 3 Disassembly - JVC KD-R491 Schematic Diagrams

3.1 Main body
3.1.1 Removing the MAIN PWB (See Fig.1 to 3)
(1) Disengage the 6 hooks, and remove the SUB PANEL
ASS'Y. (See Fig.1)
SUB PANEL ASS'Y
(2) Remove the 2 screws. (See Fig.2)
(3) Disengage the 4 hooks, and remove the BOTTOM PLATE.
(See Fig.2)
(4) Disconnect the FFC wire forn the connector. (See Fig.2)
BOTTOM PLATE
CN1
SECTION 3
DISASSEMBLY
: Hook position
Fig.1
: Hook position
Fig.2
(No.MA665<Rev.001>)11/33
(5) Remove the 2 screws (a), and remove the MAIN PWB.
(See Fig.3)
(6) Remove the 3 screws (b,c), and remove the HEAT SINK.
(See Fig.3)
HEAT SINK
c
b b
3.1.2 Removing the CD MECHANISM (See Fig.4)
(1) Remove the 3 screws, and remove the CD MECHANISM.
CD MECHANISM
a
a
MAIN PWB
Fig.3
Fig.4