Disassembly - JVC KS-FX385 Service Manual

3.1 Main body
3.1.1 Removing the front panel assembly
(See Fig.1)
(1) Push the detach button and remove the front panel assem-
bly.
3.1.2 Removing the bottom cover
(See Fig.2)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) Turn the body upside down.
(2) Insert a screwdriver under the joints to release the two
joints a on the left side, the two joints b on the right side and
the joint c on the back of the body, then remove the bottom
cover from the body.
CAUTION:
When releasing the joints using a screwdriver, do not damage
the board.
3.1.3 Removing the front chassis assembly
(See Fig.3)
• Prior to performing the following procedures, remove the front
panel assembly and bottom cover.
(1) Remove the two screws A on each side of the body.
(2) Release the two joints d and the two joints e on the sides,
then remove the front chassis assembly toward the front.
SECTION 3

DISASSEMBLY

Joint a
Joint a
Front panel assembly
Fig.1
Bottom cover
Joint c
Fig.2
Joint d Joint e
A
Joint d Joint e
Front chassis assembly
Fig.3
Detach button
Joint b
Joint b
(No.MA093B)1-5