Disassembly - JVC KD-SX60WT Service Manual

3.1 Main body
3.1.1 Removing the front panel assembly
(See Fig.1)
(1) Press the release button and remove the front panel as-
sembly.
3.1.2 Removing the bottom cover
(See Figs.2)
(1) Turn over the main body and release the two joints a, two
joints b and joint c.
CAUTION:
Do not damage the main board when releasing the joints using
a screwdriver.
3.1.3 Removing the front chassis assembly
(See Figs.3)
• Prior to performing the following procedure, remove the front
panel assembly and bottom cover.
(1) Remove the screws A on the left side of the main body.
(2) Release the two joints d and joints e on the both sides of
the main body, then remove the front chassis assembly to-
ward the front.
1-6 (No.49868)
SECTION 3

DISASSEMBLY

Front panel assembly
Joint a
Joint a
Joint d
Joint d
Release button
Fig.1
Bottom cover
Joint c
Fig.2
Joint e
A
Joint e
Front chassis assembly
Fig.3
Joint b
Joint b