Table of Contents
Advertisement
Creating the Stream of Generated and Expected Data
140
How to Replace a Current Segment
The segments contained in a block describe the data to be generated or
expected.
The default segments that appear in new blocks are pseudo segments.
They depend on the type of port (DUT input or output) and on the chosen
kind of measurement. They can be replaced by a different pseudo segment
or a real segment.
To change a segment:
1 Open the segment's context menu (right-click on the segment name).
You get a menu like the one shown below:
Figure 66
Segment Selection Menu of the Sequence Editor
2 Choose one of the options.
You can create a new segment, select an existing segment, or choose
one of the available pseudo segments.
How to Replace a Current Segment by a New
Segment
To replace the current segment by a new segment:
1 Select a segment and open the segment's context menu.
2 Select New Segment.
For details see "How to Create a New Segment" on page 157.
How to Replace a Current Segment by a
Stored Segment
PRBS and memory segments that have been created previously are stored
in the global or local segment pool.
To select a stored segment:
1 Select a segment and open the segment's context menu.
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1
How to Replace a Current Segment
Advertisement
Table of Contents
