HP 81200 User Manual page 96

Connecting the DUT How to Start the Connection Editor
The identification of the channels is:
Cx–My–Cz (ClockgroupNumber–ModuleNumber–ConnectorNumber),
such as C1 M3 C2.
The connectors are also marked with arrows. So you know at a glance
whether a connector belongs to a generator or analyzer channel.
At the right-hand side there is a template for setting up an image of the
DUT. You can add:
• Data input ports
• Data output ports
• Pulse ports
• Port terminals
96
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1